Brand New Rear Air Suspension Shock Absorber kit rear left right Air Spring for Mercedes Benz R-Class (W251) vehicles R320 R350 R500 2006-2013
Description:
This Air Ride Suspension Rear Air Spring Bag Assembly Fit For Mercedes-Benz R-Class W251 R320 R350 R500 2006-2010
Fit:
Mercedes-Benz R-Class R320 2007-2009
Mercedes-Benz R-Class R350 2006-2010
Mercedes-Benz R-Class R500 2006-2007
Part number:
A2513200425 A2513200325
Fits both the LH (Driver Side) & RH (Passenger Side) Rear
Package include:
1 x Air Spring Bag
1 x rubber cap
1 x white plastic copper
This part is compatible with 11 vehicle(s):
Notes | Year | Make | Model | Trim | Engine |
| 2010 | Mercedes-Benz | R350 | 4Matic Wagon 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| 2009 | Mercedes-Benz | R320 | Bluetec Wagon 4-Door | 3.0L 2987CC V6 DIESEL DOHC Turbocharged |
| 2009 | Mercedes-Benz | R350 | 4Matic Wagon 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| 2008 | Mercedes-Benz | R320 | CDI Wagon 4-Door | 3.0L 2987CC V6 DIESEL DOHC Turbocharged |
| 2008 | Mercedes-Benz | R350 | 4Matic Wagon 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| 2007 | Mercedes-Benz | R320 | CDI Wagon 4-Door | 3.0L 2987CC V6 DIESEL DOHC Turbocharged |
| 2007 | Mercedes-Benz | R350 | 4Matic Wagon 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| 2007 | Mercedes-Benz | R500 | Base Wagon 4-Door | 5.0L 4966CC V8 GAS SOHC Naturally Aspirated |
| 2007 | Mercedes-Benz | R63 AMG | Base Wagon 4-Door | 6.3L 6208CC V8 GAS DOHC Naturally Aspirated |
| 2006 | Mercedes-Benz | R350 | 4Matic Wagon 4-Door | 3.5L 3498CC V6 GAS DOHC Naturally Aspirated |
| 2006 | Mercedes-Benz | R500 | Base Wagon 4-Door | 5.0L 4966CC V8 GAS SOHC Naturally Aspirated |
Things to know about air spring:
1.Air Spring Installation
1).Before you start installing air springs, make sure you have all the necessary tools and equipment
to perform the repair safely.
2). Familiarize yourself with the suspension on which you are performing the repair by reviewing the
manufacturers service guide.
3). If you are in doubt about something, ask for assistance from a qualified suspension specialist, the
suspension manufacturer or the air spring manufacturer; This can save you a lot of time and
aggravation later in the job
2.Important tips to remember when installing a new unit
1).Check levelling valve, linkage and transmission parts for wear and damage and if necessary replace
the damaged parts.
2).Check that the shock absorber for leakages and take a shock absorber test. A defective shock
absorber must be replaced.
Once the air lines are disconnected, check their entire length for cracks or other damage. Replace
worn parts.
With the air spring removed, other parts of the air suspension become more accessible. Check for
wear or damage of the frame hangers, trailing arm bushings, torque rods, the trailing arms and the
air spring mounts. When it is necessary, also replace parts.
3).Check bearing for air spring bellow for external damage, deformation, sharp edges and correct
fastening.
4).Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to
the suspension.
5).Always use new attaching bolts for the installation and observe the tightening torques. Never use
old bolts, because these can fall out.
6).Check the linkage of the levelling valve to see that it is functioning properly. Under load, the linkage
should move from the neutral position up to the intake position. This lets air into the springs,
which brings the arm back to the neutral position.That opens the exhaust valve, allowing air to
escape until the arm returns to the neutral position. Then check the driving level.
• About Us:
We offer replacement parts for auto air suspension system such as air suspension shocks,air springs,
air suspension compressors,air suspension repair kits,control arms and so on for Mercedes-Benz,
BMW,Audi,Landrover.All parts are 100% compatible with the original OEM components,and they
are offered with a-12-month warranty.